Bambu Lab
Bambu Lab H2D
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max350 °C (662 °F)
- Bed max120 °C (248 °F)
- Enclosureenclosed
- HardenedStock
- AMS / MMUAMS
Sources & notes
The Bambu Lab H2D lists a maximum nozzle temperature of 350 °C (662 °F) and lists a maximum bed temperature of 120 °C (248 °F), according to https://bambulab.com/en/h2d/tech-specs. Manufacturer page checked 2026-10-15.
Source checked 15 October 2026.
| Maximum nozzle | 350 °C (662 °F) |
|---|---|
| Maximum bed | 120 °C (248 °F) |
| Enclosure | enclosed |
| Stock nozzle hardened | Yes |
| Direct drive | — |
| AMS or MMU | AMS |
The H2D technical specifications list a hardened steel nozzle, a 350 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The same table lists active chamber heating to 65 °C, a door sensor, and a shell of aluminum, steel, plastic, and glass. The product page describes a chamber with doors.
Filament odometry is listed as supported with AMS. The specification does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
What maximum nozzle temperature does the Bambu Lab H2D list?
350 °C (662 °F), according to https://bambulab.com/en/h2d/tech-specs.
What maximum bed temperature does the Bambu Lab H2D list?
120 °C (248 °F), according to https://bambulab.com/en/h2d/tech-specs.
Is the H2D enclosed?
Recorded as enclosed.
Does the H2D ship with a hardened nozzle?
The source describes a hardened stock nozzle.
Materials on this printer
Open a material to see which listed limits the H2D can meet.