Bambu Lab H2D
Bambu Lab H2D against 113 ASA products: 95 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 15 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA Aero | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA-CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab Matte ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-GF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ASA+ | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro Matte ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum ASA Extrafill | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| Polymaker ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart ASA-GF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| 3DPower ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA 3DXMax | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Dolos Color Shifting | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Galactic | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-GF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Original | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Prime | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Matte ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberon Fiberon ASA-CF 08 | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA Basic | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX CF10 | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Flame Retardant | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Foaming | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Kevlar | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ReForm – rApollo | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| IEMAI ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| iSANMATE ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA-CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mosaic ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X CF CF ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA-Aero | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA 5Kevlar | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA GF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA GF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA 275 | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA Kevlar | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X CF10 | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X GF10 | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum X Gf10 GF ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | — | Nozzle temperature is not in our current sources. | |
| TINMORRY ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxelab ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Winkle ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Matte ASA | Fits | H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab H2D against 113 ASA products: 95 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 15 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare