Partial
Kingroon PETG CF on the P1P
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C
- Bed70–90 °C
- Speed—
- Dry—
- Density1.27 g/cm³
Print at 220–250 °C nozzle, 70–90 °C bed.
P1P maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab P1P with Kingroon PETG CF: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed PETG CF nozzle temperature?
The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C.
Can the P1P reach the listed bed temperature?
The listed bed maximum of 90 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.