Outside limits
Bambu Lab PPS-CF on the X1 Carbon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle310–340 °C
- Bed100–120 °C
- Speedup to 100 mm/s
- Dry—
- Density1.26 g/cm³
Print at 310–340 °C nozzle, 100–120 °C bed. Listed speed up to 100 mm/s.
X1 Carbon maximums: nozzle 300 °C, bed 110 °C.
Sources & notes
Bambu Lab X1 Carbon with Bambu Lab PPS-CF: The listed nozzle temperature starts at 310 °C, above this printer's maximum of 300 °C. This printer cannot print this material at the recommended nozzle temperature.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PPS-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The tech specs PDF lists a hardened steel nozzle and a 300 °C maximum hot end temperature.
Maximum build plate temperature is listed as 110 °C at 220 V and 120 °C at 110 V. The number stored here is 110.
The PDF lists a chamber monitoring camera and says filament odometry is optional with AMS. It does not use the word enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab X1 Carbon reach the listed PPS-CF nozzle temperature?
The listed nozzle temperature starts at 310 °C, above this printer's maximum of 300 °C. This printer cannot print this material at the recommended nozzle temperature.
Can the X1 Carbon reach the listed bed temperature?
The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.