Bambu Lab X1 Carbon

PLA

Bambu Lab X1 Carbon against 877 PLA products: 685 are within the published limits, 0 exceed a published limit, and 192 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.

Filament	Result	Why	Buy
Amolen Basic Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Basic Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Conductive PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Crystal Transparent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Dual Color Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Dual Color Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Galaxy Sparkle Shiny Galaxy Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Marble PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Amolen PLA Metal	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Quad Color Silk PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Rainbow Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen S-Series Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Shiny Glitter Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Shiny Gradient Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Silk GF PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Amolen Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Temperature Color Change PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Transparent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Triple Color Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Triple Color Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen UV Color Change PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Amolen Wood PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic High-Speed PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Galaxy	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Matte	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Metal	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Silk Dual-Tricolor	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Anycubic PLA Special	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Aero	Fits	The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Basic Gradient	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Galaxy	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Glow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Lite	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Marble	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Matte	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Metal	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Pure	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Silk Dual Color	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Silk Multi-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Silk+	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Sparkle	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Tough+	Fits	The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Translucent	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Bambu Lab PLA-CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Bambu Lab Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb Economy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb LW-HT PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb PHA PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb r-Semi PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb Semi PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
colorFabb StoneFill PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality CR-PLA Carbon	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality Ender Fast PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality Hyper Luminous PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality Hyper PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality Hyper PLA-CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Creality Hyper Rainbow PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Creality PLA CR-Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Creality Soleyin Ultra PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO Galaxy PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA Glow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA Marble	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA MATTE	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA Metallic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA PRO	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA Sparkle	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ELEGOO PLA-CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
ELEGOO Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Burnt Titanium	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Burnt Titanium Dual-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Burnt Titanium Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Burnt Titanium Triple Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Galaxy	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA High-Speed	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Light Weight	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Luminous	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte Dual-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte Gradient	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte High Speed	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte High Speed Gradient Multi-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte High Speed Rock Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte High Speed Triple-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Matte Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Metallic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Silk High-Speed Dual-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Silk High-Speed Quadruple	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Silk High-Speed Triple-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Silk Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Ultra Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eryone PLA-CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
eSUN 3D Dark Twinkling PLA Magic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D Mystic Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D Peak PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
eSUN 3D PLA-Chameleon	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-HS	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Lite	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Luminous	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Luminous Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-LW	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Matte	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Metal	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Silk	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Silk Candy	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Silk Magic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Silk Metal	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Silk Rainbow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-ST	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Stars	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D PLA-Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
eSUN 3D UV Change PLA UV Color Change	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr Basic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr BioFusion PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr BioFusion Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr Flax PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr GreenTEC Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr GreenTEC PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr Pearl PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr PLA NX2 Matt	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
extrudr Wood PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fillamentum PLA Crystal Clear	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fillamentum PLA Extrafill	Fits	The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox Metallic Finish PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox PLA Basic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Hatchbox PLA Matte	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox PLA Max	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox PLA Metal	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox PLA Pro	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox Transparent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox UV Color Changing PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hatchbox Wood PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland Galaxy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland PLA Basic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland PLA Chameleon	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland Pla Glitter Rainbow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland PLA Matte	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland PLA Mystic Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland Pla Silk Rainbow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inland Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
JAYO High Speed Matte PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
JAYO Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
JAYO PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
JAYO Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Kingroon Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Kingroon High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Kingroon Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Kingroon PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Kingroon PLA Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Kingroon PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Kingroon Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture High Speed PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Air	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Overture PLA Cream	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Easy	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Easy Glow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Professional	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Refill	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Rock	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Super	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture PLA Turbo Rapid	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture Shimmer PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Overture Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Creator Special Edition PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Draft PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Dual Panchroma Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker For Production Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Gradient Panchroma PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker HT PLA PRO	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker HT-PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker HT-PLA-GF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Polymaker LW PolyLite PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Metallic PolyLite PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Metallic Polylite Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Muted Panchroma Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Neon Panchroma PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Panchroma Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Panchroma PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Panchroma Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker PLA PolyCast	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Polylite PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Polylite PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Polymaker Polymaker PLA Pro	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker PolyMax PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Polysonic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Satin Panchroma PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polymaker Wood PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Basic PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Conductive PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Fiber HT Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Fluorescent PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Glitter PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Iron Metal Composite PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Marble PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Metal Composite PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Metallic PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Multicolor PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Nebula PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Opaque PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Pearl PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Protopasta PLA Green Glow-in-the-Dark	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Recycled PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Satin PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Stainless Steel Metal Composite PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Static Dissipative Carbon Fiber PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Protopasta Static Dissipative PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Steel Metal Composite PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Still Colorful Recycled PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Thermochromic PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Protopasta Translucent PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prusament Blend Silk PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prusament Mystic Premium PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prusament PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prusament PLA Recycled	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prusament PLA Woodfill	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prusament rPLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU APLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Fluorescent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU High Speed Matte PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU High Speed PLA Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Carbon Fiber	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
SUNLU PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
SUNLU PLA Classic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Galaxy	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Glow In The Dark	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Matte	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Matte Dual-Color	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Silk	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Transparent Rainbow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Twinkling	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU PLA-Meta	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Real Wood Fiber PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Silk 2.0	Fits	The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Temperature Color Change PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Transparent Clear PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SUNLU Upgrade PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
123-3D 123-3D Filament PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
22 Network Glow PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
22 Network Matte PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
22 Network PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
22 Network Silk PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3D Fuel Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3D Prima Basic Recycle PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3D Printing Canada Budget PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DE Premium	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DE Premium Silk	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DEA PLA Basic	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DEA PLA Marble	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DEA PLA Matte	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DEA PLA Silk	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DEA PLA Translucent	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DEA PLA Wood	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DFOX PLA REFILL	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DHoJor PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DHoJor PLA Matte	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DHoJor Silk	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE eco Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE eco Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE eco PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE eco Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE magic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE mystery PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DJAKE Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DO PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Basic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Dual Color Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower HT 150 PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Hyper Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Marble PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Pastel PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DPower Select PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DXTech EcoMax PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DXTech Economy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DXTech Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DXTech PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DXTech PLA 3DXStat ESD	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
3DXTech PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Aceaddity Marble PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Aceaddity Matte PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Aceaddity Silk Magic PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Aceaddity Wood PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North E PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North HT-PLA Pro Matte	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North Matte High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North PLA CF	Fits	The listed nozzle maximum of 200 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Add-North PLA Economy	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North PLA Matte Textura	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North PLA Premium Silk	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North PLA Textura Flare	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North PLA Wood	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North rPLA RE-ADD	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North X-PLA	Fits	The listed nozzle maximum of 200 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Add-North X-PLA High Speed	Fits	The listed nozzle maximum of 200 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Alzament PLA Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Alzament PLA Chameleon	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Alzament PLA Matte	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Alzament PLA Silk	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Alzament PLA-CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
AmazonBasics Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Ambrosia PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Ambrosia PLA Dolos Color Shifting	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Ambrosia PLA Galactic	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Ambrosia PLA Silk	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AmeLeis PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
American Filament Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
American Filament PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
American Filament Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Arianeplast Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Arianeplast PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Arianeplast PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Arianeplast Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Artillery Artillery Basic PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ATARAXIA ART Flexible 89A PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ATARAXIA ART High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ATARAXIA ART Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ATARAXIA ART PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ATARAXIA ART Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Atomic Filament PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Atomic Filament PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Atomic Filament Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AURAPOL L-EGO PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AURAPOL Metallic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AURAPOL PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AURAPOL PLA HT110	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AURAPOL Wood PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm Glitter PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm Matte HS PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm PLA Original	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm PLA Prime	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm Silk PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
AzureFilm Wood PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
BIQU PLA GO	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Buddy3D Glow PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Buddy3D PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Buddy3D Silk PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
CC3D Dual Color Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
CC3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
CC3D PLA Max	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
CC3D Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
COEX 3D Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
COEX 3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
COEX 3D PLA VO3D High Impact	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
COEX 3D Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Cookiecad PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Cookiecad PLA Mermaid (purple	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Cookiecad PLA Mermaid Fast Change (purple	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Cookiecad PLA Unicorn Fast Change (purple	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Cookiecad Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Copymaster PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dancyn 3D Prints PLA Basic	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dancyn 3D Prints PLA Metal Series	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Das Filament Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Das Filament Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Das Filament PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Das Filament PLA Toms3D	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Devil Design Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Devil Design PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Devil Design Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dremel Df PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dremel Digilab Eco PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dremel Digilab PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dremel Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dremel PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Dremel Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
DuramiC 3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EasyPrint PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EconoFil Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EconoFil Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EconoFil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EconoFil Standard PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EconoFil Standard Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eolas Prints High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eolas Prints Ingeo 850 PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eolas Prints Ingeo 870 PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eolas Prints Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eolas Prints PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Eolas Prints Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EPAX High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EPAX Luminous High Speed Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EPAX Matte High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EPAX Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Fluorescent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Iridescent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Metallic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Pearl PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS Silver Glitter PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
EUMAKERS UV Reactive Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy Easy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy Fibersilk Metallic Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy HD PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy HS Clear High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy Impact PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy PLA FiberSatin	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy PLA FiberSilk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy PLA FiberWood	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy PLA Mineral	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy R PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy Refill Easy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Fiberlogy Refill R PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FiberThree F3 GF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
FiberThree PLA GF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilaCube PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilaCube PLA Greenery	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentive PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Army Edition PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Crystal Clear PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Extrafill PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM MarbleJet PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Pastel Edition PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Pearl PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Skin Edition PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FilamentPM Timberfill PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentree Blaster PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentree PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentree PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Filamentree Plus PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentworld Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentworld PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filamentworld Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filatech PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Filkemp PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE Gradient Rapid Chameleon PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
FLASHFORGE Rapid Chameleon PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE Rapid Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE Rapid PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FLASHFORGE Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura Bulk PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura EasyFil e Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura EasyFil ePLA	Fits	The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura EasyFil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura EasyFil PLA - Glow in the Dark	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura EasyFil PLA - Glow in the Dark	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura EasyWood	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura Galaxy PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura High Gloss PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura High Precision PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura MetalFil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura Premium PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura ReForm r PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura StoneFil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
FormFutura Volcano Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Francofil Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Francofil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Geeetech Luminous Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Geeetech Matte PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Geeetech PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Geeetech PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Geeetech PLA Marble	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Geeetech PLA Wood	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Geeetech Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
GIANTARM Glow in the Dark PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
GIANTARM PLA Silk	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks Color Change PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks Fluorescent PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks Glitter Sparkle PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Gizmo Dorks Thermochromic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hobby Lobby Candyblack/Silver	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hobby Lobby PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Hobby Lobby PLA Silk	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
IC3D Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
IC3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
IEMAI CF-PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
IEMAI PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
IIID MAX PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Insignia PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Insignia Silk_PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inslogic High Speed Marble PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inslogic High Speed PLA Pro	Fits	The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inslogic Matte PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inslogic Multicolor Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inslogic PLA CF15	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Inslogic PLA Pro	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Inslogic WoodFill PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
iSANMATE iSANMATE Matte PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
iSANMATE iSANMATE violet	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Jessie PLA Premium Elixir	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Jessie Premium PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Jessie Premium PLA Glitter	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
KiwiFil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
KiwiFil PLA "Sparkly Green Ocean"	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
KiwiFil PLA Rainbow "Sparkly Green Ocean"	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
KiwiFil PLA Rainbow "Sparkly Purple Galaxy"	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
KiwiFil PLA Rustic Rainbow	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
KiwiFil Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
L3D PLA Basic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
L3D PLA Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Landu PLA Metal	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Landu PLA Silk	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
LayerWorks Solutions LayerWorks WORKS series	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
LOCYFENS Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
LOVOON Silk Magic Color	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
MarsWork PLA Basic	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
MarsWork PLA Matte	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Matter3D Inc Glitter Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Matter3D Inc Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Matter3D Inc Performance PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Matter3D Inc PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
MatterHackers Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
MatterHackers PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
MatterHackers Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Mika3D Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Mosaic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Art Glitter	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Art Glowing	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Art Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Art Mystic Green	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Art Thermo	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Premium	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Premium Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Tech 607	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nebula PLA Tech 609 HD	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nexaforge PLA Basic	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Nobufil PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Numakers Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Numakers PETG HS	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Numakers PLA Marble	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Numakers PLA Wood	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Numakers PLA-CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Numakers Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
OVV3D Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
OVV3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
OVV3D Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Basic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Celestial PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Dual Matte PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Dual Silk PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Dual Special PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Galaxy PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Glow PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Gradient Galaxy	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Gradient Matte PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Gradient Satin PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Gradient Translucent PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Luminous PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Marble PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Metallic PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Neon PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma PLA Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Satin PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Starlight PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Temp Shift PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma Translucent PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Panchroma UV Shift PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Paramount 3D Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Paramount 3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Paramount 3D PLA Flex	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Paramount 3D Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Patron EG Marble PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Patron EG Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Phrozen PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Polar Filament PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite CosPLA Version A	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite CosPLA Version B	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite LW-PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite Metallic PLA Pro	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite PLA Pro	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolyLite PLA-CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
PolySonic PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PolySonic PLA Pro	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Precision 3D Filament Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Precision 3D Filament PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Easyprint Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Easyprint PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Flame Retardant PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Gradient PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Marble PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Metal Shine PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Metal Shine Primaselect Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Pastel PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Primaselect Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Primaselect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Primaselect PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
PrimaCreator Primavalue High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Primavalue Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Primavalue PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Satin PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaCreator Sparkle PrimaSelect PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA Glossy	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA Matt	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA METAL	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA PRO	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA Satin	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaSelect Tough PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrimaValue PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Print With Smile PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Print With Smile PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Print With Smile Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Bicolor Magic Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Elixir Jessie Premium Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Gradient Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Jessie Premium PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
PrintedSolid Rainbow Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Shiny Gradient Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
PrintedSolid TriColor Magic Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB HS-PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Galaxy	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Glow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Matte	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Meta	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Pastel	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Silk Dual	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Silk Tri	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Professional LAB PLA-CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Prografen PLA Graphene Light	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Prografen PLA Graphene Strong	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Push Plastic High Heat PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Basic	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Matte Basic	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Matte Rapido	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Metal Rapido	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Rapido	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Silk Rapido	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA Wood	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
QIDI Tech PLA-CF	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Recreus PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
RecyclingFabrik Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
RecyclingFabrik PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
RecyclingFabrik Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Galaxy PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments LW AERO PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Magic PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Magic Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Matte PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
ROSA3D Filaments Multicolour Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Pastel PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
ROSA3D Filaments PLA Starter Neon Green Glow in the Dark	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Plus ProSpeed Impact PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Rainbow Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments ReFill PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments ReFill Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Speed Matt Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ROSA3D Filaments Starter PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart Glossy Gt 3 Silk High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart Gt 3 Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart High Flowability Flexible Gt 3 PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart Lite Gt 3 High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SainSmart Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D Go&Print PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D HR-870 PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D PLA 700	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D PLA 850	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D PLA Silk 850	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Sakata 3D Wood PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Siddament Siddament	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Slic3D PLA Basic	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Crystal PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Neon PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Pastel PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D PLA 3D850	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D PLA 3D870	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D PLA EP Easy Print	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D PLA Iris	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Recycled PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SMART MATERIALS 3D Wood PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint HS-PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Galaxy	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Glow	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Marble	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Matte	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Meta	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Silk	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Silk Dual	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Silk Tri	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA Wood	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SmartPrint PLA-CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Snapmaker Basic PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker Breakaway Support for PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker Glow-in-the-dark PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker Matte PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker PLA Full Spectrum	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker PLA-CF	Fits	The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Snapmaker Silk Dual-Color PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker Silk PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker SnapSpeed PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Snapmaker Wood PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
SOVB 3D Fil PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Crystal Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum FlameGuard PLA	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum FlameGuard Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Glitter Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Huracan PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Huracan Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum LW-PLA UltraFoam	Fits	The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Metal Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Pastello PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA AquaPrint	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Carbon	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Spectrum PLA Crystal	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Electrically Conductive	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Glitter	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Glow in the Dark	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA GreenyHT	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA GreenyPro	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Magic SILK	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA MATT	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Metal	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Nature	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Premium	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Premium HighSpeed	Fits	The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA SILK	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA SILK Rainbow	Fits	The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Thermoactive	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA Tough	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum PLA WOOD	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum R PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum SafeGuard PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Spectrum Stone Age PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
StrongHero3D N2 N3 Multi Color	Fits	The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TECBEARS Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TECBEARS PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TECBEARS Plus High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TECBEARS Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Tectonic 3D Aura PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TEQStone Glow PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TEQStone Marble PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TEQStone PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TEQStone PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
TEQStone Silk PLA	Fits	The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
The Filament HT-PLA	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
The Filament PLA	Fits	The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
The Filament PLA CF	Fits	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
The Filament PLA HS	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
The Filament PLA Lite	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
The Filament PLA Matte	—	Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TINMORRY Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TINMORRY Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TINMORRY PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
TINMORRY PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
TINMORRY Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
UniTak3D PLA Matte	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Verbatim PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Voxel PLA PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle HD PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle High Speed PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle PLA UL94 V0	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Winkle Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
XZN Glow PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
XZN Gradient PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
XZN Marble PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
XZN PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
XZN PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
XZN Silk PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
XZN Transparent PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ZIRO 3D Fluorescence PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ZIRO 3D Glitter Diamond PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ZIRO 3D Gradiant Matte PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ZIRO 3D Gradient Color PLA Silk	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
ZIRO 3D Gradient Twinkling PLA	Fits	The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech Glow PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech PLA CF	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.	Buy
Zyltech Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech Texas Twister Series Multi Color Matte PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech Texas Twister Series Multi Color PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy
Zyltech Texas Twister Series Multi Color Silk PLA	Fits	The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.	Buy

As an Amazon Associate we earn from qualifying purchases.

Questions

Can the Bambu Lab X1 Carbon print PLA?

What does within listed limits mean?

The filament's listed nozzle and bed maxima do not exceed the printer's listed maxima, and no recorded enclosure or hardened-nozzle requirement conflicts with the printer. Missing fields are not treated as a pass.