Polymaker PLA on the X1 Carbon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C
- Bed50–70 °C
- Speed—
- Dry—
- Density1.24 g/cm³
Print at 190–230 °C nozzle, 50–70 °C bed.
X1 Carbon maximums: nozzle 300 °C, bed 110 °C.
Sources & notes
Bambu Lab X1 Carbon with Polymaker PLA: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The tech specs PDF lists a hardened steel nozzle and a 300 °C maximum hot end temperature.
Maximum build plate temperature is listed as 110 °C at 220 V and 120 °C at 110 V. The number stored here is 110.
The PDF lists a chamber monitoring camera and says filament odometry is optional with AMS. It does not use the word enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab X1 Carbon reach the listed PLA nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.
Can the X1 Carbon reach the listed bed temperature?
The listed bed maximum of 70 °C is within this printer's maximum of 110 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.