Fits

Anycubic PLA Matte on the K1C

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle190–230 °C
Bed55–65 °C
Speed—
Dry50 °C maximum
Density1.31 g/cm³

Print at 190–230 °C nozzle, 55–65 °C bed. Dry at 50 °C if it's been open. No drying time on the source.

Nozzle190–230 °C

Bed55–65 °C

Shared scale, 0–320 °C. A missing bar means that temperature is not in our current sources.

K1C maximums: nozzle 300 °C, bed 100 °C.

Filament page · K1C

Sources & notes

Creality K1C with Anycubic PLA Matte: K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Anycubic PLA Matte technical data sheet · checked 15 October 2026 · Printer source · Filament JSON

Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.

Questions

Can the Creality K1C reach the listed PLA Matte nozzle temperature?

The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.

Can the K1C reach the listed bed temperature?

The listed bed maximum of 65 °C is within this printer's maximum of 100 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

A hardened nozzle is not recorded for this filament.