Fits
Bambu Lab Support For PLA/PETG on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–240 °C (374–464 °F)
- Bed35–60 °C (95–140 °F)
- Speedup to 100 mm/s
- Dry75 °C (167 °F) for 8 h
- Density1.28 g/cm³
Print at 190–240 °C (374–464 °F) nozzle, 35–60 °C (95–140 °F) bed. Dry 8 h at 75 °C (167 °F) if it's been open. Listed speed up to 100 mm/s.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with Bambu Lab Support for PLA/PETG: CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab Support for PLA/PETG technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed Support For PLA/PETG nozzle temperature?
The listed nozzle maximum of 240 °C (464 °F) is within this printer's maximum of 290 °C (554 °F).
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.