Partial

Overture Luminous High Speed Glow TPU on the CORE One+

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle210–240 °C
Bed30–60 °C
Speed—
Dry70 °C maximum
Density1.21 g/cm³

Print at 210–240 °C nozzle, 30–60 °C bed. Dry at 70 °C if it's been open. No drying time on the source.

Nozzle210–240 °C

Bed30–60 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

CORE One+ maximums: nozzle 290 °C, bed 120 °C.

Filament page · CORE One+

Sources & notes

Prusa CORE One+ with Overture Luminous High Speed Glow TPU: This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.

An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.

Questions

Can the Prusa CORE One+ reach the listed Luminous High Speed Glow TPU nozzle temperature?

The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C.

Can the CORE One+ reach the listed bed temperature?

The listed bed maximum of 60 °C is within this printer's maximum of 120 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.