Partial
Bambu Lab Matte ASA CF on the XL
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle235–260 °C (455–500 °F)
- Bed90–110 °C (194–230 °F)
- Speed—
- Dry—
- Density1.07 g/cm³
Print at 235–260 °C (455–500 °F) nozzle, 90–110 °C (194–230 °F) bed.
XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa XL with Bambu Lab Matte ASA CF: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed Matte ASA CF nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 290 °C (554 °F).
Can the XL reach the listed bed temperature?
The listed bed maximum of 110 °C (230 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.