Bambu Lab TPU 90A on the XL
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle200–250 °C
- Bed30–35 °C
- Speedup to 200 mm/s
- Dry70 °C maximum
- Density1.24 g/cm³
Print at 200–250 °C nozzle, 30–35 °C bed. Dry at 70 °C if it's been open. No drying time on the source. Listed speed up to 200 mm/s.
XL maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa XL with Bambu Lab TPU 90A: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed TPU 90A nozzle temperature?
The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C.
Can the XL reach the listed bed temperature?
The listed bed maximum of 35 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.