Anycubic PLA Plus on the Q1 Pro
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C
- Bed55–65 °C
- Speed—
- Dry50 °C maximum
- Density1.21 g/cm³
Print at 190–230 °C nozzle, 55–65 °C bed. Dry at 50 °C if it's been open. No drying time on the source.
Q1 Pro maximums: nozzle 350 °C, bed not in our current sources.
Sources & notes
Qidi Q1 Pro with Anycubic PLA Plus: This printer's maximum bed temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Anycubic PLA Plus technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.
The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.
The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.
Questions
Can the Qidi Q1 Pro reach the listed PLA Plus nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C.
Can the Q1 Pro reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.