Bambu Lab ASA Aero on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle240–280 °C
- Bed80–90 °C
- Speedup to 150 mm/s
- Dry80 °C for 8 h
- Density0.99 g/cm³
Print at 240–280 °C nozzle, 80–90 °C bed. Dry 8 h at 80 °C if it's been open. Listed speed up to 150 mm/s.
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with Bambu Lab ASA Aero: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab ASA Aero technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed ASA Aero nozzle temperature?
The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C.
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 90 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.