Bambu Lab PET-CF on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C (428–482 °F)
- Bed70–90 °C (158–194 °F)
- Speedup to 100 mm/s
- Dry80 °C (176 °F) maximum
- Density1.29 g/cm³
Print at 220–250 °C (428–482 °F) nozzle, 70–90 °C (158–194 °F) bed. Dry at 80 °C (176 °F) if it's been open. No drying time on the source. Listed speed up to 100 mm/s.
SV08 Max maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Sovol SV08 Max with Bambu Lab PET-CF: This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed PET-CF nozzle temperature?
The listed nozzle maximum of 250 °C (482 °F) is within this printer's maximum of 300 °C (572 °F).
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 90 °C (194 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.