Fits
Bambu Lab TPU 95A HF on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–240 °C
- Bed30–35 °C
- Speedup to 200 mm/s
- Dry70 °C for 8 h
- Density1.22 g/cm³
Print at 220–240 °C nozzle, 30–35 °C bed. Dry 8 h at 70 °C if it's been open. Listed speed up to 200 mm/s.
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with Bambu Lab TPU 95A HF: SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab TPU 95A HF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed TPU 95A HF nozzle temperature?
The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C.
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 35 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.