Bambu Lab PLA Tough+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C
- Bed35–65 °C
- Speedup to 150 mm/s
- Dry55 °C for 8 h
- Density1.22 g/cm³
Those settings follow the Bambu Lab PLA Tough+ technical data sheet. Where an older database figure disagrees, the note is under Sources & notes.
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Not enough data
- A1 miniNot enough data
- P1PNot enough data
- P1SNot enough data
- X1CNot enough data
- MK4SNot enough data
- Core One+Not enough data
- XLNot enough data
- K1CNot enough data
- CentauriNot enough data
- Kobra 3 MaxNot enough data
- Q1 ProNot enough data
- SV08 MaxNot enough data
Colors
- Black#000000
- Cyan#009BD8
- Gold#DDA52F
- Gray#AFB1AE
- Orange#DC3A27
- Silver#959698
- White#FFFFFF
- Yellow#F4D53F
Related
Answers
- How do I get good PLA prints?
- What is PLA+ and is it better than PLA?
- Do I need to dry filament, and how?
- How fast can I print PLA and PETG?
Sources & notes
Bambu Lab PLA Tough+ (PLA) lists 220–250 °C nozzle and 35–65 °C bed, from Bambu Lab PLA Tough+ technical data sheet (https://store.bblcdn.eu/s8/default/f0d6e1c73b9e42c3abeb9540f3433225/new_Bambu_PLA_Tough_Technical_Data_Sheet.pdf), checked 2026-10-14.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Tough+ technical data sheet · Safety sheet · Brand site · Page JSON
Full specifications
| Material | PLA |
|---|---|
| Nozzle temperature | 220–250 °C |
| Bed temperature | 35–65 °C |
| Print speed | up to 150 mm/sVolumetric flow was not on the source. |
| Volumetric flow | — |
| Drying | 55 °C for 8 h |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.22 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Manufacturer page checked | 14 October 2026Bambu Lab PLA Tough+ technical data sheet |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab A1 mini | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1P | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1S | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X1 Carbon | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa MK4S | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa CORE One+ | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa XL | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Creality K1C | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Elegoo Centauri Carbon | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Anycubic Kobra 3 Max | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Qidi Q1 Pro | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Sovol SV08 Max | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
Questions
What nozzle temperature does Bambu Lab PLA Tough+ recommend?
Bambu Lab PLA Tough+ lists a recommended nozzle temperature of 220–250 °C on the manufacturer technical data sheet.
What bed temperature does Bambu Lab PLA Tough+ recommend?
Bambu Lab PLA Tough+ lists a recommended bed temperature of 35–65 °C on the manufacturer technical data sheet.
What print speed does Bambu Lab PLA Tough+ list?
Bambu Lab PLA Tough+ lists a print speed up to 150 mm/s on the manufacturer technical data sheet. Volumetric flow is not on that sheet.
Does Bambu Lab PLA Tough+ require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does Bambu Lab PLA Tough+ require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources.
How should Bambu Lab PLA Tough+ be dried?
Dry Bambu Lab PLA Tough+ for 8 h at 55 °C, from the manufacturer technical data sheet.
What spool weights does Bambu Lab PLA Tough+ come in?
Listed spool weights: 1 kg (1000 g).
What is the price per kilogram of Bambu Lab PLA Tough+?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, product, spoolWeightsG.
Bambu Lab PLA Tough+ technical data sheet
License Manufacturer technical data sheet. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, drying.