Fits
ELEGOO PLA Cmyk on the A1
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C (374–446 °F)
- Bed35–65 °C (95–149 °F)
- Speedup to 300 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.26 g/cm³
Print at 190–230 °C (374–446 °F) nozzle, 35–65 °C (95–149 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 300 mm/s.
A1 maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab A1 with ELEGOO PLA CMYK: A1 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 15 October 2026. Manufacturer page checked 14 October 2026.
ELEGOO PLA CMYK US product page · checked 15 October 2026 · Printer source · Filament JSON
The A1 FAQ states a maximum hotend temperature of 300 °C and a maximum heatbed temperature of 100 °C.
The same FAQ says the printer is pre-installed with a 0.4 mm stainless steel nozzle. Hardened steel nozzles are sold separately.
The FAQ does not call the frame open or enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab A1 reach the listed PLA Cmyk nozzle temperature?
The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
Can the A1 reach the listed bed temperature?
The listed bed maximum of 65 °C (149 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.