Fits
Bambu Lab ASA Aero on the H2D
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle240–280 °C (464–536 °F)
- Bed80–90 °C (176–194 °F)
- Speedup to 150 mm/s
- Dry80 °C (176 °F) for 8 h
- Density0.99 g/cm³
Print at 240–280 °C (464–536 °F) nozzle, 80–90 °C (176–194 °F) bed. Dry 8 h at 80 °C (176 °F) if it's been open. Listed speed up to 150 mm/s.
H2D maximums: nozzle 350 °C (662 °F), bed 120 °C (248 °F).
Sources & notes
Bambu Lab H2D with Bambu Lab ASA Aero: H2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 15 October 2026.
Bambu Lab ASA Aero technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The H2D technical specifications list a hardened steel nozzle, a 350 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The same table lists active chamber heating to 65 °C, a door sensor, and a shell of aluminum, steel, plastic, and glass. The product page describes a chamber with doors.
Filament odometry is listed as supported with AMS. The specification does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
Can the Bambu Lab H2D reach the listed ASA Aero nozzle temperature?
The listed nozzle maximum of 280 °C (536 °F) is within this printer's maximum of 350 °C (662 °F).
Can the H2D reach the listed bed temperature?
The listed bed maximum of 90 °C (194 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.