Fits
Bambu Lab TPU For AMS on the P1S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–240 °C (428–464 °F)
- Bed30–35 °C (86–95 °F)
- Speedup to 130 mm/s
- Dry70 °C (158 °F) for 8 h
- Density1.26 g/cm³
Print at 220–240 °C (428–464 °F) nozzle, 30–35 °C (86–95 °F) bed. Dry 8 h at 70 °C (158 °F) if it's been open. Listed speed up to 130 mm/s.
P1S maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1S with Bambu Lab TPU for AMS: P1S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab TPU for AMS technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The P1S specification table lists a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate. The shell is plastic and glass.
Bambu Lab describes the P1S as a fully enclosed body and says fiber-reinforced filament is not recommended until the extruder and hotend are upgraded.
The P1 series page describes a direct-drive extruder and AMS multi-color printing.
Questions
Can the Bambu Lab P1S reach the listed TPU For AMS nozzle temperature?
The listed nozzle maximum of 240 °C (464 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P1S reach the listed bed temperature?
The listed bed maximum of 35 °C (95 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.