Prusa XL
Prusa XL against 113 ASA products: 74 fit, 25 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 14 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA Aero | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Bambu Lab Matte ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| colorFabb ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone ASA-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D ASA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro Matte ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum ASA Extrafill | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| Polymaker ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart ASA-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| 3DPower ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA 3DXMax | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Dolos Color Shifting | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Galactic | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Ambrosia ASA-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Atomic Filament ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| AURAPOL ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Original | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Prime | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Matte ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberon Fiberon ASA-CF 08 | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FilamentPM ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FLASHFORGE ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA Basic | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX CF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura ASA ApolloX Flame Retardant | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Foaming | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Kevlar | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ReForm – rApollo | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| IEMAI ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-ASA | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Inslogic ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| iSANMATE ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Mosaic ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X CF CF ASA | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Paramount 3D ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA-Aero | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA 5Kevlar | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ROSA3D Filaments ASA GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SainSmart ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SainSmart Gt 3 ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SmartPrint ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA 275 | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum ASA Kevlar | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X CF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum ASA-X GF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum X Gf10 GF ASA | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Tectonic 3D Aura ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TINMORRY ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxelab ASA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Winkle ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Matte ASA | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Prusa XL against 113 ASA products: 74 fit, 25 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 14 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare